Description

ISO 5599 1 standard ESV series solenoid valves- various installation modes

Product features

Succinct appearance and compact conformation.
The installation size conforms to ISO 5599/1 standard.
Because of the special seals, the features are large flow rate and long lifetime.
For 200/300/400 series you can adjust the installation direction of the gasket to change the acting type: internal pilot, external pilot, or air control.
You need to install the valve together with the sub-base. There are individual and parallel type for manifold sub-base.
There are various connection and installation method for manifold. It is easy to use.
The manifold for 200/300/400 series have the function of exhaust throttling, so it is not necessary to connect another throttle valve.

Specifications

Model			Specifications
Fluid			Air(to be filtered by 40µm filter element)
Acting			Internal or external pilot
Lubrication			Not required
Pressure	Internal pilot		0.2~1.0MPa(2~10.0bar)(29~145psi)
	External pilot		0~1.0MPa(0~10.0bar)(0~145psi)
Control pressure (external pilot)			0.2~1.0MPa(2~10.0bar)(29~145psi)
Maximum pressure			1.5MPa(15.0bar)(215psi)
Temperature			-20~70℃
Orifice size (manifold)			200 Series:1/4″;300 Series:3/8″;400 Series:1/2″
Orifice size (end plate)			200 Series:3/8″;300 Series:1/2″;400 Series:3/4″
Voltage range			AC ±15% DC ±10%
Power consumption			AC 3.5VA DC 3.0W
Activating time (0.5Mpa) Open/close		ESV200 series	210 220 Series:33\41ms 230 Series:38\50ms
		ESV300 series	310 320 Series:42\55ms 330 Series:50\62ms
		ESV400 series	50\68ms
Insulation			Class B
Protection			IP65
Lifetime			30 millions over the normal
Installation size			ISO5599-1 standard

Symbol

Ordering code

①Note: The model with internal pilot can be changed with the one with external pilot.

Note:
1.For the same mode, the port size of end-plate is bigger than the sub-base (for example ESV202M, the port size of the sub-base is 1/4″, and the port size of the end plate is 3/8″)
2.Only individual pilot port is available for individual sub-base.
3.The manifold sub-base must be used with end plate kit, individual pilot port and centralized pilot port can be mixed.