Airtac

Showing 1–16 of 25 results

  • 2-wire reed sensor connection

    2-wire reed sensor connection, E type

    2-wire reed sensor connection, E type, normally open, generally used with standard cylinders ISO 6431, VDMA 15552 or compact cylinders ISO21287. They are introduced in the groove of the cylinder and fixed by tightening the screw where the application needs them to be installed, with the LED parallel to the surface of the cylinder. According to…

  • 2-wire reed sensor connectionG type

    2-wire reed sensor connection, G type

    2-wire reed sensor connection, J type, normally open, generally used with compact cylinders, slide table cylinders, air grippers and other special cylinders. When combined with a fixing band or a tie rod sensor accessory, they can be used with tie rod cylinders or round cylinders. They are introduced in the groove of the cylinder and…

  • 2-wire reed sensor connection

    2-wire reed sensor connection, H type

    2-wire reed sensor connection, H or HS (compact) type, normally open, generally used with compact cylinders, slide table cylinders, air grippers and other special cylinders.. This is introduced in the groove of the cylinder and fixed by tightening the screw, thus fixing the clamp of the sensor on the superior part of the cylinder, where…

  • 2-wire reed sensor connection

    2-wire reed sensor connection, J type

    2-wire reed sensor connection, J type, normally open, generally used with compact cylinders. This is introduced in the groove of the cylinder and fixed by tightening the screw, thus fixing the clamp of the sensor on the superior part of the cylinder, where the application needs them to be installed, with the LED parallel to…

  • ACA series shock absorbers

    ACA series shock absorbers

    ACA series shock absorbers Product features Excellent and stable deceleration and shock absorbing;if impacted by load, the resistance will automatically adjust. Outer body of integrated structure is treated by QPQ, which has optimum corrosion and wear resistance and can withstand high pressure; it is easy to install and adjust for all threaded outer body which…

  • ACJ series shock absorbers

    ACJ series shock absorbers

    ACJ series shock absorbers Product features Excellent and stable deceleration and shock absorbing;if impacted by load, the resistance will automatically adjust. Outer body of integrated structure is treated by QPQ, which has optimum corrosion and wear resistance and can withstand high pressure; it is easy to install and adjust for all threaded outer body which…

  • Back mounting for various cylinders MI series

    Back mounting for various cylinders MI series Various models: simple mounting, double mounting etc Diameters: 32, 40, 50, 63, 80 etc Details in the tables below:

  • Back mounting for various cylinders SI SE series

    Simple or double back mounting – various models Cylinders SE/ SI

  • 2-wire reed sensor connection

    E type magnetic sensor, 2 or 3 wire, solid state connection

    E type magnetic sensor, normally open, 2 or 3 wire (PNP/NPN), solid state connection – generally used with standard cylinders ISO 6431, VDMA 15552 or compact cylinders ISO21287. These are introduced in the groove of the cylinder and fixed by tightening the screw, where the application needs them to be installed, with the LED parallel…

  • Floating Knuckle

    Floating Knuckle

    Floating Knuckle –  cylinder joint accessory Ordering code Dimensions Model/Item MA MB MC MD ME MF MG MH MI MJ MK F-M08125F 51 20 6 17 24 11.5 6 8 M8×1.25 M8×1.25 13 F-M10125F 58 22 7 21 26 11.5 6 10 M10×1.25 M10×1.25 12 F-M12125F 58 22 8 21 28 11.5 7 12 M12×1.25…

  • 2-wire reed sensor connectionG type

    G type magnetic sensor, 2 or 3 wire, solid state connection

    G or GS type magnetic sensor, normally open, 2 or 3 wire (PNP/NPN), solid state connection – generally used with air grippers, compact cylinders, slide table cylinders and other special cylinders. Used with a fixing band or a tie rod cylinder accessory, they can be installed on tie rod cylinders or round cylinders too. These…

  • 2-wire reed sensor connection

    H type magnetic sensor, 2 or 3 wire, solid state connection

    H type magnetic sensor, normally open, 2 or 3 wire (PNP/NPN), solid state connection – generally used with air grippers, compact cylinders, slide table cylinders and other special cylinders. These are introduced in the groove of the cylinder and fixed by tightening the screw, where the application needs them to be installed, with the LED…

  • I Knuckle

    I Knuckle

    I Knuckle – cylinder joint accessory Ordering code Dimensions ISO standard Model/Item NC ND NE NF NG NH NM F-M04070II 4 16 21 6.8 8 M4X0.7 3.9 F-M06100II 5 21 28 8.5 8 M6×1.0 6 F-M08125II 8 30 40 11 15 M8×1.25 8 F-M10125II 10 40 50 15 20 M10×1.25 10 F-M12125II 12 48 62…

  • 2-wire reed sensor connection

    J type magnetic sensor, 2 or 3 wire, solid state connection

    J type magnetic sensor, normally open, 2 or 3 wire (PNP/NPN), solid state connection – generally used with compact cylinders. These are introduced in the groove of the cylinder and fixed by tightening the screw that attaches the clamp of the sensor to the superior part of the cylinder’s groove , where the application needs…

  • Magnetic sensors for compact cylindersMD

    Magnetic sensors for compact cylindersMD, MK, TR, ACQ, ACP, TWQ, SDA series

    Magnetic sensors for compact cylindersMD, MK, TR, ACQ, ACP, TWQ, SDA series Code CS1-G Specifications Dimensions Ordering code for sensors for compact cylinders Installation method Instructions: Sensor shall not fall down or bear great impact when it is installed. The wire of the sensor shall not move with the action of the cylinder. Clamping torque…

  • Magnetic sensors for round cylinders MI

    Magnetic sensors for round cylinders MI, MA, MF, PB, MAL series

    Magnetic sensors for round cylinders MI, MA, MF, PB, MAL series Code CS1-M Specifications Dimensions Cs1-M sensors Ordering code Mounting method: Encircle the bandage around the outside of the cylinder body and make it closely next to the cylinder wall. Snap the clamping screw into the button orifice and adjust it to the proper position….