/ / / / TCL-TCM series tri-rod guided cylinders

TCL-TCM series tri-rod guided cylinders

Peste 14 ani de experienta in domeniu!

  • Check Mark Promptitudine, raspunsuri si solutii rapide!
  • Check Mark Livrare rapida - predare curier in aceeasi zi!
  • Check Mark Baza de date (fise tehnice) complexa
SKU: pll_5c619c702c5db Categories: ,

Description

TCL-TCM series tri-rod guided cylinders


Product features

  • JIS standard is implemented.
  • Two guides of special bearing steel and linear bearing of bronze bearing guide are used to prevent rotating. They can bear high torque and radial load.
    • Note: Steel ball linear bearing: It is suitable for elevation action of cylinder on the situation requiring low fraction action process.
    • Bronze sliding bearing: It is suitable for the action that has radial load resistance. Compared to normal cylinder of same use, the horizontal impact resistance is doubled and it has stronger torsion rigidity.
  • Drive unit and guide unit are in the same barrel that no additional accessories are needed with minimal space required. The air intake is optional and it is convenient to install.
  • The bottom, bac side and fixing plate of main body respectively has two exact orientation orifices (see ØPA  orifice an the orifice in XX point), which can provide orientation installation with high precision for the special situation.
  • Options of switch mounting with provision 4 mounting slots.
  • Special design of main body provides multi-mount.

Specifications

Bore size mm

12

16

20

25

32

40

50

63

Acting

Double acting

Fluid

Air(to be filtered by 40µm filter element)

Operating pressure

0.1~1.0MPa(14~145Psi)

Maximum pressure

1.5MPa(213Psi)

Temperature℃

-20~70

Speed mm/s

30~500

Stroke tolerance

+1.0
0

Cushion type

Bumper

Non-rotating tolerance ① Linear bearing

±0.08°

±0.07°

±0.06°

±0.05°

Bronze bearing

±0.10°

±0.09°

±0.08°

±0.06°

Port size ②

M5×0.8

1/8″

1/4″

① Non-rotation precision of fixing plate is equal to the fixing angle of the flange in the completely retract position.
②PT, NPT and G threads are available.

Plus, TC series are all with magnet.

Stroke

Bore size mm

Standard stroke mm

Maximum stroke

12 10 20 25 30 40 50 60 70 75 80 90 100 125 150 150
16 10 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 200
20~25 20 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 250
32~63 25 30 40 50 60 70 75 80 90 100 125 150 175 200 225 250 250

Note: If the ordered cylinder does not have a standard stroke, the back flange with be added from the cylinder with standard stroke, if the discrepancy between standard stroke and non standard stroke is 1 mm(Ø12~Ø32) or 5 mm(Ø40~Ø63). For instance, 28 mm stroke cylinder is made of 30 mm standard stroke cylinder.

Symbol

Ordering code

①TC series are all with magnet.
②When the thread is M5, the code is simple.

Dimensions

Usual Product Codes

3D Product Sheet