TN series twin-rod cylinder
Peste 14 ani de experienta in domeniu!
- Promptitudine, raspunsuri si solutii rapide!
- Livrare rapida - predare curier in aceeasi zi!
- Baza de date (fise tehnice) complexa
Description
TN series twin-rod cylinder
Product features
- Enterprises standard is implemented.
- Embedded installation and fixation mode saves the installation space.
- It has good resistance to bending and twisting moments.
- Mounting holes on three sides facilitates multi-position mounting.
- Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
- Standard configuration of this series has magnet and the type without magnet is not available.
Specifications
| Bore size mm | 10 | 16 | 20 | 25 | 32 |
| Acting | Double acting | ||||
| Fluid | Air(to be filtered by 40µm filter element) | ||||
| Operating pressure | 0.1~1.0MPa(14~145Psi) | ||||
| Maximum pressure | 1.5MPa(215Psi) | ||||
| Temperature ℃ | -20~70 | ||||
| Speed mm/s | 30~500 | ||||
| Adjustable stroke mm | -10~0 | ||||
| Stroke tolerance | +1.0 | ||||
| Cushion type | Bumper | ||||
| Anti-rotating tolerance ① | ±0.4° | ±0.3° | |||
| Port size ② | M5×0.8 | 1/8″ | |||
① Retract position
② PT, NPT and PT threads are available. Plus, TR series are all with magnet.
Stroke
Ø Bore size mm | Standard stroke mm | Maximum stroke | Available stroke |
| 10 | 10 20 30 40 50 60 70 80 90 100 | 100 | 150 |
| 16 20 25 32 | 10 20 30 40 50 60 70 80 90 100 125 150 175 200 | 200 | 250 |
Observation: Please contact us for specifications, details and other types of these cylinders.
Symbol
Ordering code
Dimensions
Ø10
Item/Ø bore size | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 |
E | 30 | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 |
Ø16~Ø25
Item/Ø Bore size | A | B | C | D | Stroke | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 125 | 150 | 175 | 200 | 250 | F | G |
16 | 68 | 15 | 53 | 20 | E | 30 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 87.5 | 100 | 112.5 | 125 | – | 8 | 47 |
20 | 78 | 20 | 58 | 20 | 35 | 35 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 87.5 | 100 | 112.5 | 125 | 150 | 10 | 55 | |
25 | 81 | 19 | 62 | 30 | 40 | 40 | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 92.5 | 105 | 117.5 | 130 | 155 | 10 | 66 |
Item/Ø bore size | H | I | J | K | L | M | N1 | N2 | P1 | P2 | Q | R | S | T | V | W |
16 | 7 | 24 | M4×0.7 dp5 | 47 | 53 | 20 | 22 | 11 | 2-sides Ø 7.5 dp7.2mm guiding orifice:Ø4.5 | 2-sides Ø 8 dp 4.5mm guiding orificej:Ø4.5 | 34 | 3 | 54 | 21 | 8 | 6.1 |
20 | 10 | 28 | M4×0.7 dp 5 | 55 | 61 | 24 | 25 | 12 | 2sides Ø 7.5 dp7.2mm guiding orifice:Ø4.5 | 2-sides Ø 8 dp 4.5mm guiding orifice:Ø4.5 | 44 | 3.5 | 62 | 25 | 10 | 8.1 |
25 | 9 | 34 | M4×0.7 dp 6 | 66 | 72 | 29 | 27 | 12 | 2-sidesØ .5 dp7.2mm guiding orifice:Ø4.5 | 2-sides Ø 8 dp4.5mm guiding orifice:Ø4.5 | 56 | 6 | 73 | 30 | 12 | 10.1 |
Ø32
Item/ stroke | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 125 | 150 | 175 | 200 | 250 |
E | 45 | 50 | 55 | 60 | 65 | 70 | 75 | 80 | 85 | 90 | 102.5 | 115 | 127.5 | 140 | 165 |
N1 | 35 | 40 | |||||||||||||
Installation and application
- When load changes in the work, the cylinder with abundant output capacity shall be selected.
- Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
- Necessary protection measure shall be taken i n the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
- Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
- The medium used by cylinder shall be filtered to 40µ m or below.
- As both the front cover and piston are short, too large stroke can not be selected.
- Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
- The cylinder shall avoid redial load in operation to maintain the normal and extend service life.
- If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be inserted into the inlet and outlet ports. As the precision of the manufacture and guide is high, please do not dismantle the fixed block or cylinder cover.
Additional information
| Brand |
|---|
Usual Product Codes
–
