Pressure booster, bore 40, compression ratio 1:4 – UM11-040RC1.4

Peste 14 ani de experienta in domeniu!

  • Check Mark Promptitudine, raspunsuri si solutii rapide!
  • Check Mark Livrare rapida - predare curier in aceeasi zi!
  • Check Mark Baza de date (fise tehnice) complexa
SKU: UM11-040RC1.4 Category:

Description

Pressure booster, bore 40, compression ratio 1:4
Boost ratio X4
Order code: UM11-040RC1.4
Mechanically, the pressure booster is composed of two pistons, with a 40 bore, connected between them, which compress alternatively the inlet air. These pistons are controlled by a 5/2 pneumatic valve, in turn controlled by two limit switches. the pressure booster starts automatically, as soon as a pressure is applied to the inlet, and work until it reaches four times the inlet pressure. The outlet pressure can be adjusted by using a pressure regulator mounted at the inlet. the presence of a non-return valve allows to keep the pressure multiplied even in the absence of inlet pressure.
We recommend you to use an air tank, to avoid pressure pulse. An optional non-return valve can be useful to speed up the initial filling of the system.
The pressure boosters are not designed to operate in place of a compressor, but to provide momentary pressure increases on applications that require greater pneumatic force.
The booster has an average life of over 20 million cycles when the conditions of use are optimal, that is a high degree of air quality, minimum 50 microns filtration. Wherever it is possible do not use lubricated air.
Replacement kit for the seals are available on request.

[youtube https://www.youtube.com/watch?v=BF2abPXfiXk?rel=0]

Technical data

Conection: G1/8
Maximum working pressure: 10 Bar
Nominal bore: 5 mm
Weight: 1.6 Kg
Fluid: Compressed air, preferably non lubricated
Ambient temperature: -20°C+50°C
Mounting position: it is suggested mounting with the inlet connection above

Attention: all the sliding elements and the seals, are lubricated with special grease. If you change or begin to lubricate with oil mist, you will have to lubricate continuously.

Materials:

Body and caps: Aluminium 2011 – Anodized
Piston: Aluminium 2011 – Anodized
Rod: Chromated steel
Fixing screws: Galvanized steel
Valve: Aluminium 2011 – Anodized, Brass
Seals: NBR si Polyurethane

Additional information

Brand

Usual Product Codes

3D Product Sheet