TN series twin-rod cylinder

Peste 14 ani de experienta in domeniu!

  • Check Mark Promptitudine, raspunsuri si solutii rapide!
  • Check Mark Livrare rapida - predare curier in aceeasi zi!
  • Check Mark Baza de date (fise tehnice) complexa
SKU: TN

Description

TN series twin-rod cylinder

Product features

  • Enterprises standard is implemented.
  • Embedded installation and fixation mode saves the installation space.
  • It has good resistance to bending and twisting moments.
  • Mounting holes on three sides facilitates multi-position mounting.
  • Bumper in front of the barrel can adjust the stroke of cylinder and relieve impact.
  • Standard configuration of this series has magnet and the type without magnet is not available.

Specifications

Bore size mm

10

16

20

25

32

Acting

Double acting

Fluid

Air(to be filtered by 40µm filter element)

Operating pressure

0.1~1.0MPa(14~145Psi)

Maximum pressure

1.5MPa(215Psi)

Temperature ℃

-20~70

Speed mm/s

30~500

Adjustable stroke  mm

-10~0

Stroke tolerance

+1.0
0

Cushion type

Bumper

Anti-rotating tolerance ①

±0.4°

±0.3°

Port size ②

M5×0.8

1/8″

① Retract position
② PT, NPT and PT threads are available. Plus, TR series are all with magnet.

Stroke

Ø Bore size mm

Standard stroke mm

Maximum stroke

Available stroke

10 10 20 30 40 50 60 70 80 90 100 100 150
16
20
25
32
10 20 30 40 50 60 70 80 90 100 125 150 175 200 200 250

Observation: Please contact us for specifications, details and other types of these cylinders.

Symbol

Ordering code

Dimensions

Ø10

Item/Ø bore size

10

20

30

40

50

60

70

80

90

100

E

30

30

35

40

45

50

55

60

65

70

 

Ø16~Ø25

Item/Ø Bore size

A

B

C

D

Stroke

10

20

30

40

50

60

70

80

90

100

125

150

175

200

250

F

G

16

68

15

53

20

E

30

35

40

45

50

55

60

65

70

75

87.5

100

112.5

125

8

47

20

78

20

58

20

35

35

40

45

50

55

60

65

70

75

87.5

100

112.5

125

150

10

55

25

81

19

62

30

40

40

45

50

55

60

65

70

75

80

92.5

105

117.5

130

155

10

66

 

Item/Ø bore size

H

I

J

K

L

M

N1

N2

P1

P2

Q

R

S

T

V

W

16

7 24 M4×0.7 dp5

47

53

20

22

11

2-sides Ø 7.5
dp7.2mm
guiding orifice:Ø4.5
2-sides Ø 8
dp 4.5mm
guiding orificej:Ø4.5

34

3

54

21

8

6.1

20

10 28 M4×0.7 dp 5

55

61

24

25

12

2sides Ø 7.5
dp7.2mm
guiding orifice:Ø4.5
2-sides Ø 8
dp 4.5mm
guiding orifice:Ø4.5

44

3.5

62

25

10

8.1

25

9 34 M4×0.7 dp 6

66

72

29

27

12

2-sidesØ .5
dp7.2mm
guiding orifice:Ø4.5
2-sides Ø 8
dp4.5mm
guiding orifice:Ø4.5

56

6

73

30

12

10.1

 

Ø32

Item/ stroke

10

20

30

40

50

60

70

80

90

100

125

150

175

200

250

E

45

50

55

60

65

70

75

80

85

90

102.5

115

127.5

140

165

N1

35

40

 

Installation and application

  1. When load changes in the work, the cylinder with abundant output capacity shall be selected.
  2. Relative cylinder with high temperature resistance or corrosion resistance shall be chosen under the condition of high temperature or corrosion.
  3. Necessary protection measure shall be taken i n the environment with higher humidity, much dust or water drops, oil dust and welding dregs.
  4. Dirty substances in the pipe must be eliminated before cylinder is connected with pipeline to prevent the entrance of particles into the cylinder.
  5. The medium used by cylinder shall be filtered to 40µ m or below.
  6. As both the front cover and piston are short, too large stroke can not be selected.
  7. Anti-freezing measure shall be adopted under low temperature environment to prevent moisture freezing.
  8. The cylinder shall avoid redial load in operation to maintain the normal and extend service life.
  9. If the cylinder is dismantled and stored for a long time, please conduct anti-rust treatment to the surface. Anti-dust cap shall be inserted into the inlet and outlet ports. As the precision of the manufacture and guide is high, please do not dismantle the fixed block or cylinder cover.

Additional information

Brand

Usual Product Codes

3D Product Sheet